MT PROFESSIONAL H & AB CLASS POWER AMPLIFIERS

... CLICK ON THE IMAGE FOR ENLARGE THE PICTURE ...
 
MT1201/MT801/M701
  

  • MT-1201...2500+2500W RMS @ 2 Ohms
H Class ... MT 1201/ 801/ 701
Damping > 800 in MT 1201/ 801/ 701
Built - In Crossover
Stable @ 2 ohms
  • MT- 801...2150+2150W RMS @ 2 Ohms
  • MT- 701...1600+1600W RMS @ 2 Ohms
  • MT- 401... 950+950W RMS @ 2 Ohms (2U)
The MT Series range of power amplifiers from Proton are what every text book amplifier in the pro-audio industry should be. If one is to look at the desirable aspects of these qualities then it is very simple. These qualities are maximum reliability, minimum maintenance, high power to weight ratio, flexibility, efficiency, thermal control and of course sound quality. MT series use innovative methods in "Circuit breaker" technologies for the power supplies, and also the auto cutoff which will switch ON, in the rare case high DC current abnormalities, protecting both, the amplifiers and the loudspeaker from damage. The heavily protected chassis is quite "bombproof" in construction ensuring minimum physical damage.

An added feature in the MT Series is the built-in crossover to make the amplifier a subwoofer amplifier or a midhighs amplifier, besides being a full range device of course. This amount of flexibility is really desirable especially in tight real world situations. Sound quality is subjective, however the MT Series maximizes engineering principals to ensure a fantastic subjective result. The Damping factor of MT1201/ 801/ 701 being above 800, ensures iron fisted control of the low frequencies. The S/N ratio of greater than 103 dB ensures a clean sound in operation, assisted by the fact that channel separation is greater than 60dB. One should seriously consider the MT Series amplifiers for usage in any area of professional audio amplification when the goal set is one of a no compromise approach.

  • Stable performance / precise workmanship.
  • Low power consumption less than 0.1A when working without load & Zero noise.
  • High-efficient APS circuit for best power supply.
  • Perfect limiter circuit protects your loudspeakers.
  • 2 cooling fans controlled by temperature.
  • Equipped with Rubycon capacitors
  • Built-in High Pass & Low Pass Crossover
  • Specialized system protection circuit,
    comprehensive, safe, reliable and accurate such as Short circuit protect, Over load protect, DC protect, (inrush audio peak) Limiter Soft start, High Temp protect, HF protect, Back-EMF protect etc.
  • Stereo / Parallel / Bridge Modes
... CLICK ON THE IMAGE FOR ENLARGE THE PICTURE ...
MT1201 2SA1943 28 Nos. 2SC5200 28 Nos.
MT801 2SA1943 24 Nos. 2SC5200 24 Nos.
MT701 2SA1943 20 Nos. 2SC5200 20 Nos.
MT401 2SA1943 12 Nos. 2SC5200 12 Nos.

For Service Parts Click on the Link Below

MT1201

MT701