... CLICK ON THE IMAGE FOR ENLARGE THE PICTURE ...
QX-5050 PRO...2150+2150 W RMS @ 2 Ohms
QX-2450 ...........1050+1050W RMS @ 2 Ohms
QX-4050 PRO...1550+1550 W RMS @ 2 Ohms
QX-1850 ........... 750 + 750W RMS @ 2 Ohms
QX-3050 PRO...1200+1200W RMS @ 2 Ohms
The new innovative QX Pro Series Amplifiers QX-5050Pro/ QX-4050& Qx3050 Pro are a technological tour-de-force. From the input stage to the output stage the QX Pro Series has precise and comprehensive protection systems with enough power rest, Moreover, the sensitivity of QX-PRO series is 1V. which provides very safe working condition to the amp. The QX-5050 Pro used the PCB with 2 oz. Copper making the amp very safe and reliable. The patented aluminum heat sink is of special tooling which has 60% higher cooling than regular heat sinks and much lighter than normal heatsink to boot . The QX-5050PRO/ QX-4050 have two-step class H circuit design.
Perfect LXTM input overload limiter protection. The input is well controlled by this thoughtful feature. It is dynamic in nature, which means that it works differently over varying frequencies and temperatures. This will ensure clean distortion-less sound that will protect both the amplifier and the loudspeaker.
Special LRSTM short circuit protection. When the output stage sees a short circuit, this advanced circuit can mute the input signal and switch off the relay. At the same time, it locks the amp by another circuit. One needs to switch off the amp and then switch on again to restart the amp.
LCD Display. The LCD readout displays information like temperature, Operating mode, Protection etc. This provides help in immediate trouble shooting.
Special SLDDTM sound dynamic processing circuit. An inbuilt 0.5dB-0.8dB limiter delay, variable in delay value over frequencies makes the amplifier sound dynamic and quick.
Special CLPTM clip limiter circuit. This circuit works independently of the impedance load and frequency. The limiter range is much wider and has a smooth sound to its credit. Even with very large musical signals, there is no clipping. This can effectively protects the entire sound system from harmful distortions.
+1.5V DC protect. This protects the amplifier and Speakers very effectively
Special VLTM 24dB/oct Linkwitz-Riley filter. crossover circuit design which is of the professional standard
Transformer overheat protect. If the amplifier is overloaded the transformer will get hot .the thermal switches off the amplifier when the temperature reaches 110 degrees
Soft startup. This protects the amplifier from high inrush current when switching On the amplifier
Wider sound dynamic range. As these Series Amplifiers have sufficient power capacitance, high Spec, ODM Capacitors for better sound imaging.
Special Housing Design. For better ease in mounting
in racks and fligtcases ,the front ear is 3mm thick and especially designed back ears
... CLICK ON THE IMAGE FOR ENLARGE THE PICTURE ...
